400 hp Caterpillar 3408 SULLAIR PDR25X-46-146 Screw Compressor
bookmark_border WatchHoused, skidded Bidell Equipment screw compressor package with a Sullair PDR25X-46-146 compressor and a Caterpillar 3408 natural-gas driver, located in Drumheller, AB. The package includes an integral Airtech aerial cooler, two ASME U-stamped Bidell process vessels rated 230 psi at 300°F, and an HMI compressor control panel, and remains connected on site. Offered as-is; the unit should be inspected and gone through before reuse.
Housed, skidded Bidell Equipment screw compressor package with a Sullair PDR25X-46-146 compressor and a Caterpillar 3408 natural-gas driver, located in Drumheller, AB.
The package includes an integral Airtech aerial cooler, two ASME U-stamped Bidell process vessels with a 230 psi MAWP at 300°F, and an HMI compressor control panel, and remains connected on site.
The package is used and should be inspected and gone through before reuse.
Key Specs
Packager: Bidell Equipment
Compressor: Sullair PDR25X-46-146 single-stage screw, part number 02250114-416, serial 006-03002224
Driver: Caterpillar 3408, natural gas
Max HP: listed 400 hp (Caterpillar data plate was not located on the public photos, so arrangement, serial, hours, and continuous rating are not confirmed from those photos)
Service: Sweet (as listed)
Process-vessel MAWP: 230 psi at 300°F; MDMT -20°F at 230 psi (both vessels)
Year built: 2003 package (vessel S/N 03-212-508 stamped 2003; vessel S/N 03-212-507A stamped 2004)
Skidded and housed in a metal-clad compressor building with a Ruffneck unit heater
Cooler: Airtech Products aerial cooler, integral in the building bay (job and serial fields on the plate are blank)
Connection status: Connected
Location: Drumheller, AB
Nameplate / Registration
Bidell Equipment package plate: Gas Compression, package serial 03-212
Process vessel S/N 03-212-508 (2003): Bidell Equipment, ASME U-stamped (W, RT-2), MAWP 230 psi at 300°F, MDMT -20°F at 230 psi, CRN R2461.2, Alberta A# 490942, shell and heads SA-516-70N, shell 0.375 in, heads 0.438 in T / 0.313 in P
ABSA registered-design directory for CRN R2461.2: Bidell Equipment LP, vessel, new design, track 2003-01734, drawing 03-183-508 Rev 0, no expiry listed (directory may lag up to 24 hours and is a subset of records)
Process vessel S/N 03-212-507A (2004): Bidell Equipment, ASME U-stamped construction matching the first vessel, MAWP 230 psi at 300°F, MDMT -20°F at 230 psi, CRN R2389.2, Alberta A# 514894, shell and heads SA-516-70N, shell 0.375 in, heads 0.438 in T / 0.313 in P
ABSA registered-design directory for CRN R2389.2: Bidell Equipment LP, vessel, new design, track 2003-01624, drawing 03-183-507 Rev 0, no expiry listed (same directory caveat)
Sullair nameplate: Sullair Corporation, subsidiary of Sundstrand Corp., assembled in the USA, part number 02250114-416, model PDR25X-46-146, serial 006-03002224
Condition
Condition rating C — Used, Degraded
Seller notes the unit must be gone through
Oil staining on the skid deck, rust on the exhaust flex, and general wear consistent with a used, connected package
Vision Integrity Engineering stickers record VE/UT on A# 490942 in 3/17 and a second VE/UT in 8/17; next inspection dates are blank on both stickers
Yellow absorbent pads are on the deck; the package remains piped up on site
What's Included
Housed, skidded compression package as photographed: Sullair PDR25X-46-146 screw compressor, Caterpillar 3408 natural-gas driver, integral Airtech aerial cooler, two Bidell process vessels, HMI compressor control cabinet, and metal-clad compressor building with a Ruffneck unit heater
Disconnect and load-out will be required
Photos & Documents
23 public photos, including the Bidell package plate, both vessel nameplates, the Sullair plate, the Airtech cooler plate, the control cabinet, the driver, and interior and exterior views
No public supporting documents (U-1A, drawings, or inspection reports) are posted yet
Verification Recommendations
Confirm the Caterpillar driver serial, arrangement, running hours, and continuous horsepower from the engine data plate or hour meter
Complete current vessel inspection and UT; the 2017 VE/UT stickers have no next-inspection date filled
Confirm suction and discharge pressures, flow, and driver rating for the intended duty
Confirm registration and CRN acceptance for the destination jurisdiction
